Machinery

Sheetmetal Machinery Australia offer solutions for numerous applications including cutting, bending, punching, finishing, coil handling, HVAC, marking, engraving, and cornerforming.

Electric press brakes, hydraulic press brakes, sheetmetal guillotines, bevelling, deburring, punching, coil handling systems, corner notches, benders, ductworking, laser and waterjet cutting machines are some of the many machines we are supply.

We represent a number of reputable innovative European machine tool manufacturers such as SafanDarley, RAS, Resato, Coastone, Krasser, Boschert, Cutlite Penta, Gecam, Lasit, ACF, Simasv, and Spiro.

Use the search bar on the left to browse our extensive range of machinery.

RAS XXL-Center

Does this sound familiar? Your bread and butter is in long parts, but bending them requires two, maybe three operators. The floor space in your factory is shrinking. On the other hand the effort and cost to handle sometimes…

Does this sound familiar? Your bread and butter is in long parts, but bending them requires two, maybe three operators. The floor space in your factory is shrinking. On the other hand the effort and cost to handle sometimes...

Details
RAS VENTIrounder

The RAS VENTIrounder for the air duct production solves all these problems. It easily rounds sheet metal elbow cheeks with pre-formed Snap Lock or Pittsburgh seams. The result are perfectly rounded inside and outside elbow…

The RAS VENTIrounder for the air duct production solves all these problems. It easily rounds sheet metal elbow cheeks with pre-formed Snap Lock or Pittsburgh seams. The result are perfectly rounded inside and outside elbow...

Details
RAS Rounding Machines

Three rolls offer best results on rounding light gauge materials. The drive is connected to a motor with 1-phase power supply (household plug). The variable speed can be adjusted from 0 to 12 m/min. A counter displays the rear roll…

Three rolls offer best results on rounding light gauge materials. The drive is connected to a motor with 1-phase power supply (household plug). The variable speed can be adjusted from 0 to 12 m/min. A counter displays the rear roll...

Details
SafanDarley E-Brake 160-200T

This servo-electronic press brake is a robust version of the Original E-Brake intended for the heavy-duty segment for pressure forces of up to 200 tons and working lengths of up to 4 metres.

This servo-electronic press brake is a robust version of the Original E-Brake intended for the heavy-duty segment for pressure forces of up to 200 tons and working lengths of up to 4 metres.

Details
SafanDarley E-Brake 300T Dual Drive

The first servo-electronic press brake in the world with a patented double pulley drive. The fully electric SafanDarley E-Brake Dual Drive is capable of sheet-bending with pressure forces up to 300…

The first servo-electronic press brake in the world with a patented double pulley drive. The fully electric SafanDarley E-Brake Dual Drive is capable of sheet-bending with pressure forces up to 300...

Details
SafanDarley R-Brake 130T-3100

The SafanDarley R-Brake is a revolutionary bending-cell concept based on the SafanDarley E-Brake press brake. For the SafanDarley R-Brake, the press brake and the robot have been…

The SafanDarley R-Brake is a revolutionary bending-cell concept based on the SafanDarley E-Brake press brake. For the SafanDarley R-Brake, the press brake and the robot have been...

Details
Boschert Ergo-Cut

Industrial quality plasma cutting. The Ergo-Cut 3150 , manufactured with a stable, rigid portal design and equipped with a sophisticated linear guide system as well as a 5 axle CNC control system. Dynamic drives ensure…

Industrial quality plasma cutting. The Ergo-Cut 3150 , manufactured with a stable, rigid portal design and equipped with a sophisticated linear guide system as well as a 5 axle CNC control system. Dynamic drives ensure...

Details
Stolarczyk Decoiler with Coil Cart

Stolarczyk Automatic Decoiler
1250mm x 5 ton
Hydraulic Expansion of mandrels
Simple Installation
Available with and without coil cart

Stolarczyk Automatic Decoiler 1250mm x 5 ton Hydraulic Expansion of mandrels Simple Installation Available with and without coil cart

Details
Q-Fin F1200

Designed for processing larger work pieces. This deburring machine with vacuum system can be used for the following types of work on non-ferrous metals: finishing, deburring, burr removal, edge breaking and edge rounding with a large radius.

Designed for processing larger work pieces. This deburring machine with vacuum system can be used for the following types of work on non-ferrous metals: finishing, deburring, burr removal, edge breaking and edge rounding with a large radius.

Details
Q-Fin F200

Developed and built in the Netherlands, the Fierde is a deburring machine especially designed for processing small workpieces with a width up to 200 mm. The Fierde features a brush height tracking system designed by Q-fin.

Developed and built in the Netherlands, the Fierde is a deburring machine especially designed for processing small workpieces with a width up to 200 mm. The Fierde features a brush height tracking system designed by Q-fin.

Details
Q-Fin TopGrinder

The TopGrinder by Q-fin is a manually operated machine that can be used for various metalworking processes like grinding, deburring and polishing. The TopGrinder allows you to cost-effectively and effortlessly produce a high-grade rounding.

The TopGrinder by Q-fin is a manually operated machine that can be used for various metalworking processes like grinding, deburring and polishing. The TopGrinder allows you to cost-effectively and effortlessly produce a high-grade rounding.

Details
SafanDarley E-Brake Ultra 50-130T

This servo-electronic press brake represents the latest in electronic press brake technology. Features such as dual screens and cnc crowning are standard on all Ultra models. Options such as 3D back gauge, laser angle measurement and the EC40 smart control can all be equipped.

This servo-electronic press brake represents the latest in electronic press brake technology. Features such as dual screens and cnc crowning are standard on all Ultra models. Options such as 3D back gauge, laser angle measurement and the EC40 smart control can all be equipped.

Details
SafanDarley E-Brake 160-200 ITC

Based on the E-Brake 150T 3100 and 200T 4100. The SafanDarley ATC automatically places tools in the machine, adding efficiency without requiring additional space.

Based on the E-Brake 150T 3100 and 200T 4100. The SafanDarley ATC automatically places tools in the machine, adding efficiency without requiring additional space.

Details
AutoPOL – Offline Bending Software

Modern off-line press brake programming and unfolding of 3D CAD files. AutoPOL’s biggest advantage when compared to other OEM software is its ability generate NC-code for several brands of controllers.

Modern off-line press brake programming and unfolding of 3D CAD files. AutoPOL's biggest advantage when compared to other OEM software is its ability generate NC-code for several brands of controllers.

Details
Q-Fin F800

The F800 is suitable for products with a width up to 800 mm. This smaller version of the F1200 is also equipped with a grinding device and 4 oscillating brushes. With this machine you can perform various finishing operations.

The F800 is suitable for products with a width up to 800 mm. This smaller version of the F1200 is also equipped with a grinding device and 4 oscillating brushes. With this machine you can perform various finishing operations.

Details
Auto-Sert 20″ Throat Machine

The Auto-Sert 20″ Throat Machine is a high-powered, versatile machine which provides the flexibility to work with both flat and formed parts of varying sizes

The Auto-Sert 20" Throat Machine is a high-powered, versatile machine which provides the flexibility to work with both flat and formed parts of varying sizes

Details
Auto-Sert 36″ Throat Machine

The Auto-Sert 36″ Throat Machine offers all the features of the Auto-Sert 20″, and the ability to handle larger applications.

The Auto-Sert 36″ Throat Machine offers all the features of the Auto-Sert 20″, and the ability to handle larger applications.

Details
SafanDarley E-Brake Premium 35-130T

This servo-electronic press brake represents the latest in electronic press brake technology. Features such as dual screens and cnc crowning are standard on all Ultra models. Options such as 3D back gauge, laser angle measurement and the EC40 smart control can all be equipped.

This servo-electronic press brake represents the latest in electronic press brake technology. Features such as dual screens and cnc crowning are standard on all Ultra models. Options such as 3D back gauge, laser angle measurement and the EC40 smart control can all be equipped.

Details
RAS MiniBendCenter 2

The RAS MiniBendCenter is the world’s first automatic folding center for small parts. Blanks will be automatically fed, squared and measured. Tool setup is all automatic. A manipulator moves and rotates the blank automatically to…

The RAS MiniBendCenter is the world’s first automatic folding center for small parts. Blanks will be automatically fed, squared and measured. Tool setup is all automatic. A manipulator moves and rotates the blank automatically to...

Details
RAS Multibend Center

If you want to bend precision parts, fully automatically, at high speeds, in high quantity, regardless of batch-size, with the highest levels of flexibility and total repeatability, welcome to the next level of metal fabrication!

If you want to bend precision parts, fully automatically, at high speeds, in high quantity, regardless of batch-size, with the highest levels of flexibility and total repeatability, welcome to the next level of metal fabrication!

Details
RAS UpDownCenter 2

The UpDownCenter-2 is a semi-automatic bending center for high precision panels and boxes up to 4060 mm bending length and up to 600 mm box height. With up to 4 mm mild steel bending capacity, it is ideal for thin and medium material thicknesses…

The UpDownCenter-2 is a semi-automatic bending center for high precision panels and boxes up to 4060 mm bending length and up to 600 mm box height. With up to 4 mm mild steel bending capacity, it is ideal for thin and medium material thicknesses...

Details
RAS XL-Center

Based on the remarkable XXL-Center technology, RAS introduces a folding innovation for roofing and architectural profiles. With 3200 mm (124 inches) folding length at 1.5 mm mild steel (16-gauge) capacity, the XL-Center…

Based on the remarkable XXL-Center technology, RAS introduces a folding innovation for roofing and architectural profiles. With 3200 mm (124 inches) folding length at 1.5 mm mild steel (16-gauge) capacity, the XL-Center...

Details
RAS GIGAbend

An intelligent crowning system and 120 tons of clamping pressure ensure perfect folded parts on 6 mm mild steel or 4 mm stainless. Straight bends are essential for perfectly folded parts. A sturdy and solid machine design is the…

An intelligent crowning system and 120 tons of clamping pressure ensure perfect folded parts on 6 mm mild steel or 4 mm stainless. Straight bends are essential for perfectly folded parts. A sturdy and solid machine design is the...

Details
RAS FLEXI2bend

The FLEXI2bend metal folding system can be used to produce almost any metal bending part geometry, a materpiece of flexibility! Unique and complex parts with high added value can be bent by the FLEXI2bend with the same precision and repeatability as simple cassettes, panels or profiles…

The FLEXI2bend metal folding system can be used to produce almost any metal bending part geometry, a materpiece of flexibility! Unique and complex parts with high added value can be bent by the FLEXI2bend with the same precision and repeatability as simple cassettes, panels or profiles...

Details
RAS TURBO2plus

If you want to turn conical profiles that are plugged into each other, you should seek the adjustable stop finger watch for conical bending. Parallel bends as you come to the middle area of the machine, in which the stop finger position…

If you want to turn conical profiles that are plugged into each other, you should seek the adjustable stop finger watch for conical bending. Parallel bends as you come to the middle area of the machine, in which the stop finger position...

Details
RAS TURBObend

The first folding system that knows how to run your parts. You select the part you want to create from a picture based icon library, enter the flange dimensions and angles and push one button. The control automatically programs the…

The first folding system that knows how to run your parts. You select the part you want to create from a picture based icon library, enter the flange dimensions and angles and push one button. The control automatically programs the...

Details
RAS POWERcut2

The second generation RAS POWERcut2 swing beam shears deliver twist-free, high precision and burr-free cuts with maximum dimensional accuracy. They ensure optimal material utilization and enable an optimum workflow…

The second generation RAS POWERcut2 swing beam shears deliver twist-free, high precision and burr-free cuts with maximum dimensional accuracy. They ensure optimal material utilization and enable an optimum workflow...

Details
RAS PRIMEcut

With its 3 mm capacity and 3100 mm cutting length the RAS PRIMEcut combines all features a critical user expects from modern shearing technology. Innovative swing beam technology offers clean and right-angled cuts.

With its 3 mm capacity and 3100 mm cutting length the RAS PRIMEcut combines all features a critical user expects from modern shearing technology. Innovative swing beam technology offers clean and right-angled cuts.

Details
RAS SMARTcut

With its 2 mm capacity and 3100 mm cutting length the RAS SMARTcut combines all characteristics of a high performance, premium shear. The sheet support and sorting system leads the blanks to the backstop…

With its 2 mm capacity and 3100 mm cutting length the RAS SMARTcut combines all characteristics of a high performance, premium shear. The sheet support and sorting system leads the blanks to the backstop...

Details
RAS Swaging

The motorized or manual driven swaging machines include 9 pair of swaging wheels and a divided large stop plate in the standard configuration. The speed (RAS 11.35) can be adjusted by means of a foot switch.

The motorized or manual driven swaging machines include 9 pair of swaging wheels and a divided large stop plate in the standard configuration. The speed (RAS 11.35) can be adjusted by means of a foot switch.

Details
RAS EasyFormer

RAS introduces the EasyFormer, the second generation of intelligent swaging machines. They actually “learn” as you swage and flange! When you’re ready to produce the first work piece, just press the “Teach” function.

RAS introduces the EasyFormer, the second generation of intelligent swaging machines. They actually "learn" as you swage and flange! When you're ready to produce the first work piece, just press the "Teach" function.

Details
RAS Flanging

The RAS 21.20 flanging machine turns up 90 degree flanges on radius cheeks so that the parts are ready for Pittsburgh or Snaplock joints. Quick, Safe, Cost efficient. The operation speed is variable between 0 and 9.4 m/min.

The RAS 21.20 flanging machine turns up 90 degree flanges on radius cheeks so that the parts are ready for Pittsburgh or Snaplock joints. Quick, Safe, Cost efficient. The operation speed is variable between 0 and 9.4 m/min.

Details
RAS SpeedySeamer

The RAS 22.07 SpeedySeamer with seven rollforming stations is a multi-functional and cost-efficient machine for varying uses in the HVAC ducting industry. The top of the line RAS 22.09 SpeedySeamer is a 9-station high quality system.

The RAS 22.07 SpeedySeamer with seven rollforming stations is a multi-functional and cost-efficient machine for varying uses in the HVAC ducting industry. The top of the line RAS 22.09 SpeedySeamer is a 9-station high quality system.

Details
RAS Seam Closing Machine

Closes seams with widths of 10 mm and 13 mm on round tubes. Changeover from inside to outside seams in seconds. The working length can be doubled, by turning the tube.

Closes seams with widths of 10 mm and 13 mm on round tubes. Changeover from inside to outside seams in seconds. The working length can be doubled, by turning the tube.

Details
SafanDarley H-Brake 175-400T

The new H-Brake has a surprising number of new parts and improvements. This Hydraulic press brake includes, double pressing beam guidance, cylinder suspension with pivot bearing, a completely..

The new H-Brake has a surprising number of new parts and improvements. This Hydraulic press brake includes, double pressing beam guidance, cylinder suspension with pivot bearing, a completely..

Details
SafanDarley M-Shear

What makes these multifunctional shears unique is their innovative hybrid drive. The robust hydraulics is controlled by sophisticated electronics. The SafanDarley M-Shear uses much less oil than hydraulic…

What makes these multifunctional shears unique is their innovative hybrid drive. The robust hydraulics is controlled by sophisticated electronics. The SafanDarley M-Shear uses much less oil than hydraulic...

Details